From 4f51579cfc4d231c0696f1fdb7bef5d832fc9ba7 Mon Sep 17 00:00:00 2001
From: zhanghaowen <zhanghaowen12@huawei.com>
Date: Mon, 29 Aug 2022 21:02:23 +0800
Subject: [PATCH] Softbus transport interface Chinese comment

Signed-off-by: zhanghaowen <zhanghaowen12@huawei.com>
---
 zh-cn/native_sdk/dsoftbus/dfs_session.h       | 111 +++
 .../dsoftbus/example/transport/dfs_demo.c     | 104 +++
 .../example/transport/getsessioninfo_demo.c   | 108 +++
 .../example/transport/openauthsession_demo.c  | 133 ++++
 .../transport/sendbytes_message_demo.c        | 148 ++++
 .../example/transport/sendfile_demo.c         | 191 +++++
 .../example/transport/sendstream_demo.c       | 135 ++++
 zh-cn/native_sdk/dsoftbus/inner_session.h     |  82 ++
 zh-cn/native_sdk/dsoftbus/session.h           | 730 ++++++++++++++++++
 9 files changed, 1742 insertions(+)
 create mode 100755 zh-cn/native_sdk/dsoftbus/dfs_session.h
 create mode 100755 zh-cn/native_sdk/dsoftbus/example/transport/dfs_demo.c
 create mode 100755 zh-cn/native_sdk/dsoftbus/example/transport/getsessioninfo_demo.c
 create mode 100755 zh-cn/native_sdk/dsoftbus/example/transport/openauthsession_demo.c
 create mode 100755 zh-cn/native_sdk/dsoftbus/example/transport/sendbytes_message_demo.c
 create mode 100755 zh-cn/native_sdk/dsoftbus/example/transport/sendfile_demo.c
 create mode 100755 zh-cn/native_sdk/dsoftbus/example/transport/sendstream_demo.c
 create mode 100755 zh-cn/native_sdk/dsoftbus/inner_session.h
 create mode 100755 zh-cn/native_sdk/dsoftbus/session.h

diff --git a/zh-cn/native_sdk/dsoftbus/dfs_session.h b/zh-cn/native_sdk/dsoftbus/dfs_session.h
new file mode 100755
index 00000000..2b2f66a0
--- /dev/null
+++ b/zh-cn/native_sdk/dsoftbus/dfs_session.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2022 Huawei Device Co., Ltd.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @addtogroup 软总线
+ * @{
+ *
+ * @brief 在设备之间提供高速、安全的通信。
+ *
+ * 该部件实现附近设备之间的统一分布式通信能力管理，并提供独立于链路的设备发现和传输接口，以支持业务发布和数据传输。
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+
+/**
+ * @file dfs_session.h
+ *
+ * @brief 为软总线的分布式文件服务声明函数和常量。这些函数用于执行以下操作：
+ * <ul>
+ * <li>获取会话密钥和会话句柄</li>
+ * <li>禁用分布式文件服务的会话监听</li>
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+
+#ifndef DFS_SESSION_H
+#define DFS_SESSION_H
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief 指示会话密钥的长度，包括终止空字符 <b>\0</b>。
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+#define SESSION_KEY_LEN 32
+
+/**
+ * @example dfs_demo.c
+ */
+
+/**
+ * @brief 根据会话ID获取会话密钥。
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @param key 指示指向用于存储会话密钥的缓冲区的指针。
+ * @param len 指示缓冲区的长度。
+ * 常见的返回值如下：
+ * @return 返回<b>SOFTBUS_OK</b>，指示成功获取会话密钥。
+ * @return 返回<b>SOFTBUS_INVALID_PARAM</b>，指示输入参数的值无效。
+ * @return 返回<b>SOFTBUS_TRANS_FUNC_NOT_SUPPORT</b>，指示入参的会话ID不是该函数所支持的分布式文件服务对应的会话ID。
+ * @return 返回<b>SOFTBUS_ERR</b>，指示软总线内部处理出现错误。
+ * @return 返回<b>SOFTBUS_MEM_ERR</b>，指示内存不足。
+ * @since 1.0
+ * @version 1.0
+ */
+int32_t GetSessionKey(int32_t sessionId, char *key, unsigned int len);
+
+/**
+ * @brief 根据会话ID获取会话句柄。
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @param handle 指示指向用于存储会话句柄的缓冲区的指针。
+ * 常见的返回值如下：
+ * @return 返回<b>SOFTBUS_OK</b>，指示成功获取会话句柄。
+ * @return 返回<b>SOFTBUS_INVALID_PARAM</b>，指示输入参数的值无效。
+ * @return 返回<b>SOFTBUS_TRANS_FUNC_NOT_SUPPORT</b>，指示入参的会话ID不是该函数所支持的分布式文件服务对应的会话ID。
+ * @return 返回<b>SOFTBUS_ERR</b>，指示软总线内部处理出现错误。
+ * @return 返回<b>SOFTBUS_MEM_ERR</b>，指示内存不足。
+ * @since 1.0
+ * @version 1.0
+ */
+int32_t GetSessionHandle(int32_t sessionId, int *handle);
+
+/**
+ * @brief 根据会话ID禁用会话监听。
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * 常见的返回值如下：
+ * @return 返回<b>SOFTBUS_OK</b>，指示禁用成功。
+ * @return 返回<b>SOFTBUS_INVALID_PARAM</b>，指示输入参数的值无效。
+ * @return 返回<b>SOFTBUS_TRANS_FUNC_NOT_SUPPORT</b>，指示入参的会话ID不是该函数所支持的分布式文件服务对应的会话ID。
+ * @return 返回<b>SOFTBUS_ERR</b>，指示软总线内部处理出现错误。
+ * @since 1.0
+ * @version 1.0
+ */
+int32_t DisableSessionListener(int32_t sessionId);
+
+#ifdef __cplusplus
+}
+#endif
+#endif // DFS_SESSION_H
\ No newline at end of file
diff --git a/zh-cn/native_sdk/dsoftbus/example/transport/dfs_demo.c b/zh-cn/native_sdk/dsoftbus/example/transport/dfs_demo.c
new file mode 100755
index 00000000..e6823bc3
--- /dev/null
+++ b/zh-cn/native_sdk/dsoftbus/example/transport/dfs_demo.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2022 Huawei Device Co., Ltd.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @file dfs_demo.c
+ *
+ * @brief 分布式文件服务的示例。
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+
+//设备A：
+
+#include <stdio.h>
+#include "session.h"
+#include "softbus_config_type.h"
+
+const char *g_pkgNameA = "dms";  // 设备A的应用包名
+const char *g_sessionNameA = "DistributedFileService";  // 设备A的分布式文件服务的会话名称
+const char *g_sessionNameB = "DistributedFileService";
+const char *g_networkidB = "ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00";  // 组网后设备B生成的networkid
+const char *g_groupid = "TEST_GROUP_ID";  //组网时的群组信息
+static SessionAttribute g_sessionAttr = {
+    .dataType = TYPE_FILE,  //会话类型
+};
+const char *g_testData = "TranSessionTest_GetSessionKeyTestData";
+
+//通知会话建立成功
+static int OnSessionOpened(int sessionId, int result)
+{
+    printf("session opened,sesison id = %d\r\n", sessionId);
+    return 0;
+}
+
+//通知会话关闭
+static void OnSessionClosed(int sessionId)
+{
+    printf("session closed, session id = %d\r\n", sessionId);
+}
+
+//通知字节数据接收情况
+static void OnBytesReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session bytes received, session id = %d\r\n", sessionId);
+}
+
+//通知消息数据接收情况
+static void OnMessageReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session msg received, session id = %d\r\n", sessionId);
+}
+
+//通知流数据接收情况
+static void OnStreamReceived(int sessionId, const StreamData *data, const StreamData *ext,
+            const StreamFrameInfo *param)
+{
+    printf("session stream received, session id = %d\r\n", sessionId);
+}
+
+static ISessionListener g_sessionlistenerA = {
+    .OnSessionOpened = OnSessionOpened,
+    .OnSessionClosed = OnSessionClosed,
+    .OnBytesReceived = OnBytesReceived,
+    .OnMessageReceived = OnMessageReceived,
+    .OnStreamReceived = OnStreamReceived,
+};
+
+int main(void)
+{
+    //1、设备A先根据应用包名和会话名称通过CreateSessionServer创建会话服务并注册通道打开关闭.字节接收.消息接收的回调。
+    int ret = CreateSessionServer(g_pkgNameA, g_sessionNameA, &g_sessionlistenerA);
+    printf("create session server result = %d\n", ret);
+
+    //2、A根据本端会话名称和对端会话名称以及对端networkid调用OpenSession打开会话，根据会话的类型决定会话通道，当成功打开会话会通过回调通知设备A和设备B打开会话成功
+    //并返回会话ID，后续的操作赖此会话ID，此外sessionName必须为"DistributedFileService"。
+    int sessionId = OpenSession(g_sessionNameA, g_sessionNameB, g_networkidB, g_groupid, &g_sessionAttr);
+    printf("open session result = %d\n", sessionId);
+
+    //3、当会话打开成功后，设备A可以调用分布式文件服务相关的接口进行相应的操作。
+    char *key = (char *)g_testData;
+    unsigned int len = strlen(key);
+    ret = GetSessionKey(sessionId, key, len);
+    printf("get session key result = %d\n", ret);
+
+    int handle = 1;
+    ret = GetSessionHandle(sessionId, &handle);
+    printf("get session handle result = %d\n", ret);
+
+    ret = DisableSessionListener(sessionId);
+    printf("disable session listener result = %d\n", ret);
+}
\ No newline at end of file
diff --git a/zh-cn/native_sdk/dsoftbus/example/transport/getsessioninfo_demo.c b/zh-cn/native_sdk/dsoftbus/example/transport/getsessioninfo_demo.c
new file mode 100755
index 00000000..8ab2a18e
--- /dev/null
+++ b/zh-cn/native_sdk/dsoftbus/example/transport/getsessioninfo_demo.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright (c) 2022 Huawei Device Co., Ltd.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @file dfs_demo.c
+ *
+ * @brief 获取会话信息的示例。
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+
+//设备A：
+
+#include <stdio.h>
+#include "session.h"
+#include "softbus_def.h"
+#include "softbus_config_type.h"
+
+const char *g_pkgNameA = "dms";  // 设备A的应用包名
+const char *g_sessionNameA = "ohos.distributedschedule.dms.test";  // 设备A的分布式文件服务的会话名称
+const char *g_sessionNameB = "ohos.distributedschedule.dms.test";
+const char *g_networkidB = "ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00";  // 组网后设备B生成的networkid
+const char *g_groupid = "TEST_GROUP_ID";  //组网时的群组信息
+static SessionAttribute g_sessionAttr = {
+    .dataType = TYPE_BYTES,  //会话类型
+};
+const char *g_testData = "TranSessionTest_GetSessionKeyTestData";
+
+//通知会话建立成功
+static int OnSessionOpened(int sessionId, int result)
+{
+    printf("session opened,sesison id = %d\r\n", sessionId);
+    return 0;
+}
+
+//通知会话关闭
+static void OnSessionClosed(int sessionId)
+{
+    printf("session closed, session id = %d\r\n", sessionId);
+}
+
+//通知字节数据接收情况
+static void OnBytesReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session bytes received, session id = %d\r\n", sessionId);
+}
+
+//通知消息数据接收情况
+static void OnMessageReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session msg received, session id = %d\r\n", sessionId);
+}
+
+//通知流数据接收情况
+static void OnStreamReceived(int sessionId, const StreamData *data, const StreamData *ext,
+            const StreamFrameInfo *param)
+{
+    printf("session stream received, session id = %d\r\n", sessionId);
+}
+
+static ISessionListener g_sessionlistenerA = {
+    .OnSessionOpened = OnSessionOpened,
+    .OnSessionClosed = OnSessionClosed,
+    .OnBytesReceived = OnBytesReceived,
+    .OnMessageReceived = OnMessageReceived,
+    .OnStreamReceived = OnStreamReceived,
+};
+
+int main(void)
+{
+    //1、设备A先根据应用包名和会话名称通过CreateSessionServer创建会话服务并注册通道打开关闭.字节接收.消息接收的回调。
+    int ret = CreateSessionServer(g_pkgNameA, g_sessionNameA, &g_sessionlistenerA);
+    printf("create session server result = %d\n", ret);
+
+    //2、A根据本端会话名称和对端会话名称以及对端networkid调用OpenSession打开会话，根据会话的类型决定会话通道，当成功打开会话会通过回调通知设备A和设备B打开会话成功
+    //并返回会话ID，后续的操作依赖此会话ID。
+    int sessionId = OpenSession(g_sessionNameA, g_sessionNameB, g_networkidB, g_groupid, &g_sessionAttr);
+    printf("open session result = %d\n", sessionId);
+
+    //3、当会话打开成功后，设备A可以获取session相关的信息。
+    char sessionName[SESSION_NAME_SIZE_MAX] = {0};
+    ret = GetMySessionName(sessionId, sessionName, SESSION_NAME_SIZE_MAX);
+    printf("get mySessionName result = %d\n", ret);
+
+    char deviceId[DEVICE_ID_SIZE_MAX] = {0};
+    ret = GetPeerDeviceId(sessionId, deviceId, DEVICE_ID_SIZE_MAX);
+    printf("get peerDeviceId result = %d\n", ret);
+
+    char peerSessionName[SESSION_NAME_SIZE_MAX] = {0};
+    ret = GetPeerSessionName(sessionId, peerSessionName, SESSION_NAME_SIZE_MAX);
+    printf("get peerSessionName result = %d\n", ret);
+
+    ret = GetSessionSide(sessionId);
+    printf("get sessionside result = %d\n", ret);
+}
\ No newline at end of file
diff --git a/zh-cn/native_sdk/dsoftbus/example/transport/openauthsession_demo.c b/zh-cn/native_sdk/dsoftbus/example/transport/openauthsession_demo.c
new file mode 100755
index 00000000..362c8457
--- /dev/null
+++ b/zh-cn/native_sdk/dsoftbus/example/transport/openauthsession_demo.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2022 Huawei Device Co., Ltd.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @file openauthsession_demo.c
+ *
+ * @brief 打开认证会话的示例。
+ * 
+ * @since 1.0
+ * @version 1.0
+ */
+
+//设备A：
+
+#include <stdio.h>
+#include "inner_session.h"
+#include "session.h"
+
+ConnectionAddr g_addrInfo;  //设备间的连接信息
+const char *g_pkgNameA = "dms";  // 设备A的应用包名
+const char *g_sessionNameA = "ohos.distributedschedule.dms.test";  // 设备A的会话名称
+
+//通知会话建立成功
+static int OnSessionOpened(int sessionId, int result)
+{
+    printf("session opened,sesison id = %d\r\n", sessionId);
+    return 0;
+}
+
+//通知会话关闭
+static void OnSessionClosed(int sessionId)
+{
+    printf("session closed, session id = %d\r\n", sessionId);
+}
+
+//通知字节数据接收情况
+static void OnBytesReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session bytes received, session id = %d\r\n", sessionId);
+}
+
+//通知消息数据接收情况
+static void OnMessageReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session msg received, session id = %d\r\n", sessionId);
+}
+
+static ISessionListener g_sessionlistenerA = {
+    .OnSessionOpened = OnSessionOpened,
+    .OnSessionClosed = OnSessionClosed,
+    .OnBytesReceived = OnBytesReceived,
+    .OnMessageReceived = OnMessageReceived,
+};
+
+int main(void)
+{
+    //1、设备A先根据应用包名和会话名称通过CreateSessionServer创建会话服务并注册通道打开关闭.字节接收.消息接收的回调。
+    int ret = CreateSessionServer(g_pkgNameA, g_sessionNameA, &g_sessionlistenerA);
+    printf("create session server result = %d\n", ret);
+
+    //2、设备A先根据会话名称和连接信息在组网前通过OpenAuthSession创建裸通道进行身份协商。
+    int sessionId = OpenAuthSession(g_sessionNameA, &(g_addrInfo), 1, NULL);
+    printf("open auth session result = %d\n", sessionId);
+
+    //3、当完成身份认证后NotifyAuthSuccess通知设备A认证成功
+    NotifyAuthSuccess(sessionId);
+
+    //4、认证成功后，设备A关闭会话并移除此次会话服务。
+    ret = RemoveSessionServer(g_pkgNameB, g_sessionNameB);
+    printf("remove session server result = %d\n", ret);
+}
+
+//设备B：
+
+#include <stdio.h>
+#include "inner_session.h"
+#include "session.h"
+
+const char *g_pkgNameB = "dmsB";  // 设备B的应用包名
+const char *g_sessionNameB = "ohos.distributedschedule.dms.testB";  // 设备B的会话名称
+
+static int OnSessionOpened(int sessionId, int result)
+{
+    printf("session opened,sesison id = %d\r\n", sessionId);
+    return 0;
+}
+
+static void OnSessionClosed(int sessionId)
+{
+    printf("session closed, session id = %d\r\n", sessionId);
+}
+
+static void OnBytesReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session bytes received, session id = %d\r\n", sessionId);
+}
+
+static void OnMessageReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session msg received, session id = %d\r\n", sessionId);
+}
+
+static ISessionListener g_sessionlistenerB = {
+    .OnSessionOpened = OnSessionOpened,
+    .OnSessionClosed = OnSessionClosed,
+    .OnBytesReceived = OnBytesReceived,
+    .OnMessageReceived = OnMessageReceived,
+};
+
+int main(void)
+{
+    //1、设备B先根据应用包名和会话名称通过CreateSessionServer创建会话服务并注册通道打开关闭的回调。
+    int ret = CreateSessionServer(g_pkgNameB, g_sessionNameB, &g_sessionlistenerB);
+    printf("create session server result = %d\n", ret);
+
+    //2、设备B收到设备A的身份认证会话协商信息通过回调OnSessionOpened通知设备B身份认证会话通道打开成功。
+
+    //3、认证成功后，设备B关闭会话并移除此次会话服务。
+    ret = RemoveSessionServer(g_pkgNameB, g_sessionNameB);
+    printf("remove session server result = %d\n", ret);
+}
\ No newline at end of file
diff --git a/zh-cn/native_sdk/dsoftbus/example/transport/sendbytes_message_demo.c b/zh-cn/native_sdk/dsoftbus/example/transport/sendbytes_message_demo.c
new file mode 100755
index 00000000..9525752a
--- /dev/null
+++ b/zh-cn/native_sdk/dsoftbus/example/transport/sendbytes_message_demo.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright (c) 2022 Huawei Device Co., Ltd.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @file sendbytes_message_demo.c
+ *
+ * @brief 发送消息或者字节数据的示例。
+ * 
+ * @since 1.0
+ * @version 1.0
+ */
+
+//设备A：
+
+#include <stdio.h>
+#include "session.h"
+#include "softbus_config_type.h"
+
+const char *g_pkgNameA = "dms";  // 设备A的应用包名
+const char *g_sessionNameA = "ohos.distributedschedule.dms.test";  // 设备A的会话名称
+const char *g_networkidB = "ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00";  // 组网后设备B生成的networkid
+const char *g_groupid = "TEST_GROUP_ID";  //组网时的群组信息
+static SessionAttribute g_sessionAttr = {
+    .dataType = TYPE_BYTES,  //会话类型
+};
+
+//通知会话建立成功
+static int OnSessionOpened(int sessionId, int result)
+{
+    printf("session opened,sesison id = %d\r\n", sessionId);
+    return 0;
+}
+
+//通知会话关闭
+static void OnSessionClosed(int sessionId)
+{
+    printf("session closed, session id = %d\r\n", sessionId);
+}
+
+//通知字节数据接收情况
+static void OnBytesReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session bytes received, session id = %d\r\n", sessionId);
+}
+
+//通知消息数据接收情况
+static void OnMessageReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session msg received, session id = %d\r\n", sessionId);
+}
+
+static ISessionListener g_sessionlistenerA = {
+    .OnSessionOpened = OnSessionOpened,
+    .OnSessionClosed = OnSessionClosed,
+    .OnBytesReceived = OnBytesReceived,
+    .OnMessageReceived = OnMessageReceived,
+};
+
+int main(void)
+{
+    //1、设备A先根据应用包名和会话名称通过CreateSessionServer创建会话服务并注册通道打开关闭.字节接收.消息接收的回调。
+    int ret = CreateSessionServer(g_pkgNameA, g_sessionNameA, &g_sessionlistenerA);
+    printf("create session server result = %d\n", ret);
+
+    //2、A根据本端会话名称和对端会话名称以及对端networkid调用OpenSession打开会话，根据会话的类型决定会话通道，当成功打开会话会通过回调通知设备A和设备B打开会话成功
+    //并返回会话ID，后续的数据发送依赖此会话ID。
+    int sessionId = OpenSession(g_sessionNameA, g_sessionNameB, g_networkidB, g_groupid, &g_sessionAttr);
+    printf("open session result = %d\n", sessionId);
+
+    //3、当会话打开成功后，设备A调用SendBytes或者SendMessage向设备B发送数据。
+    const char *data = "testdata";
+    uint32_t len = strlen(data);
+    uint32_t maxLen = SOFTBUS_INT_MAX_BYTES_LENGTH;
+    ret = SendBytes(sessionId, data, len);
+    printf("send bytes result = %d\n", ret);
+
+    ret = SendMessage(sessionId, data, len);
+    printf("send message result = %d\n", ret);
+
+    //4、当数据发送完成后，设备A通过CloseSession接口关闭会话，并通知设备B关闭会话
+    CloseSession(sessionId);
+    printf("SOFTBUS_OK");
+
+    //5、关闭会话后，设备A和设备B通过RemoveSessionServer接口移除此次会话服务
+    ret = RemoveSessionServer(g_pkgNameA, g_sessionNameA);
+    printf("remove session server result = %d\n", ret);
+}
+
+//设备B：
+
+#include <stdio.h>
+#include "session.h"
+
+const char *g_pkgNameB = "dmsB";  // 设备B的应用包名
+const char *g_sessionNameB = "ohos.distributedschedule.dms.testB";  // 设备B的会话名称
+
+static int OnSessionOpened(int sessionId, int result)
+{
+    printf("session opened,sesison id = %d\r\n", sessionId);
+    return 0;
+}
+
+static void OnSessionClosed(int sessionId)
+{
+    printf("session closed, session id = %d\r\n", sessionId);
+}
+
+static void OnBytesReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session bytes received, session id = %d\r\n", sessionId);
+}
+
+static void OnMessageReceived(int sessionId, const void *data, unsigned int len)
+{
+    printf("session msg received, session id = %d\r\n", sessionId);
+}
+
+static ISessionListener g_sessionlistenerB = {
+    .OnSessionOpened = OnSessionOpened,
+    .OnSessionClosed = OnSessionClosed,
+    .OnBytesReceived = OnBytesReceived,
+    .OnMessageReceived = OnMessageReceived,
+};
+
+int main(void)
+{
+    //1、设备B先根据应用包名和会话名称通过CreateSessionServer创建会话服务并注册通道打开关闭.字节接收.消息接收的回调。
+    int ret = CreateSessionServer(g_pkgNameB, g_sessionNameB, &g_sessionlistenerB);
+    printf("create session server result = %d\n", ret);
+
+    //2、设备B通过OnSessionOpened收到会话打开的回调后后便等待设备A发送数据，当接收到数据时通过OnBytesReceived和OnMessageReceived反馈接收情况。
+
+    //3、接收数据结束后，设备B关闭会话并移除此次会话服务。
+    ret = RemoveSessionServer(g_pkgNameB, g_sessionNameB);
+    printf("remove session server result = %d\n", ret);
+}
\ No newline at end of file
diff --git a/zh-cn/native_sdk/dsoftbus/example/transport/sendfile_demo.c b/zh-cn/native_sdk/dsoftbus/example/transport/sendfile_demo.c
new file mode 100755
index 00000000..ec69edd2
--- /dev/null
+++ b/zh-cn/native_sdk/dsoftbus/example/transport/sendfile_demo.c
@@ -0,0 +1,191 @@
+/*
+ * Copyright (c) 2022 Huawei Device Co., Ltd.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @file sendfile_demo.c
+ *
+ * @brief 发送文件的示例。
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+
+//设备A：
+
+#include <stdio.h>
+#include "session.h"
+#include "softbus_config_type.h"
+
+const char *g_pkgNameA = "dms";  // 设备A的应用包名
+const char *g_sessionNameA = "ohos.distributedschedule.dms.test";  // 设备A的会话名称
+const char *g_networkidB = "ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00";  // 组网后设备B生成的networkid
+const char *g_groupid = "TEST_GROUP_ID";  //组网时的群组信息
+static SessionAttribute g_sessionAttr = {
+    .dataType = TYPE_FILE,  //文件类型
+};
+const char *g_rootDir = "/data/";  //接收方根目录
+const int FILE_NUM = 4;
+
+//通知会话建立成功
+static int OnSessionOpened(int sessionId, int result)
+{
+    printf("session opened,sesison id = %d\r\n", sessionId);
+    return 0;
+}
+
+//通知会话关闭
+static void OnSessionClosed(int sessionId)
+{
+    printf("session closed, session id = %d\r\n", sessionId);
+}
+
+//会话相关的回调
+static ISessionListener g_sessionlistenerA = {
+    .OnSessionOpened = OnSessionOpened,
+    .OnSessionClosed = OnSessionClosed,
+};
+
+static int OnSendFileProcess(int sessionId, uint64_t bytesUpload, uint64_t bytesTotal)
+{
+    printf("OnSendFileProcess sessionId = %d, bytesUpload = %u, total = %u\n",
+        sessionId, bytesUpload, bytesTotal);
+    return 0;
+}
+
+static int OnSendFileFinished(int sessionId, const char *firstFile)
+{
+    printf("OnSendFileFinished sessionId = %d, first file = %s\n", sessionId, firstFile);
+    return 0;
+}
+
+static void OnFileTransError(int sessionId)
+{
+    printf("OnFileTransError sessionId = %d\n", sessionId);
+}
+
+//文件发送相关的回调
+static IFileSendListener g_fileSendListener = {
+    .OnSendFileProcess = OnSendFileProcess,
+    .OnSendFileFinished = OnSendFileFinished,
+    .OnFileTransError = OnFileTransError,
+};
+
+int main(void)
+{
+    //1、设备A通过SetFileSendListener接口设置文件的发送回调。
+    int ret = SetFileSendListener(g_pkgNameA, g_sessionNameA, &g_fileSendListener);
+    printf("set file send listener result = %d\n", ret);
+
+    //2、设备A先根据应用包名和会话名称通过CreateSessionServer创建会话服务并注册通道打开关闭.字节接收.消息接收的回调。
+    ret = CreateSessionServer(g_pkgNameA, g_sessionNameA, &g_sessionlistenerA);
+    printf("create session server result = %d\n", ret);
+
+    //3、A根据本端会话名称和对端会话名称以及对端networkid和会话类型调用OpenSession打开会话，根据会话的类型决定会话通道，当成功打开会话会通过回调通知设备A和设备B打开会话成功
+    //并返回会话ID，后续的文件发送依赖此会话ID。
+    int sessionId = OpenSession(g_sessionNameA, g_sessionNameB, g_networkidB, g_groupid, &g_sessionAttr);
+    printf("open session result = %d\n", sessionId);
+
+    //4、当会话打开成功后，设备A调用SendFile向设备B发送文件。
+    const char *sfileList[] = {
+        "/data/big.tar",
+        "/data/richu.jpg",
+        "/data/richu-002.jpg",
+        "/data/richu-003.jpg",
+    };
+    ret = SendFile(sessionId, sfileList, NULL, FILE_NUM);
+    printf("send file result = %d\n", ret);
+
+    //5、当数据发送完成后，设备A通过CloseSession接口关闭会话，并通知设备B关闭会话
+    CloseSession(sessionId);
+    printf("SOFTBUS_OK");
+
+    //6、关闭会话后，设备A和设备B通过RemoveSessionServer接口移除此次会话服务
+    ret = RemoveSessionServer(g_pkgNameA, g_sessionNameA);
+    printf("remove session server result = %d\n", ret);
+}
+
+//设备B：
+
+#include <stdio.h>
+#include "session.h"
+
+const char *g_pkgNameB = "dmsB";  // 设备B的应用包名
+const char *g_sessionNameB = "ohos.distributedschedule.dms.testB";  // 设备B的会话名称
+const char *g_rootDirB = "/data";  //设备B的文件目录
+
+static int OnSessionOpened(int sessionId, int result)
+{
+    printf("session opened,sesison id = %d\r\n", sessionId);
+    return 0;
+}
+
+static void OnSessionClosed(int sessionId)
+{
+    printf("session closed, session id = %d\r\n", sessionId);
+}
+
+static ISessionListener g_sessionlistenerB = {
+    .OnSessionOpened = OnSessionOpened,
+    .OnSessionClosed = OnSessionClosed,
+};
+
+static int OnReceiveFileStarted(int sessionId, const char *files, int fileCnt)
+{
+    printf("File receive start sessionId = %d, first file = %s, fileCnt = %d\n", sessionId, files, fileCnt);
+    return 0;
+}
+
+static int OnReceiveFileProcess(int sessionId, const char *firstFile, uint64_t bytesUpload, uint64_t bytesTotal)
+{
+    printf("File receive Process sessionId = %d, first file = %s, bytesUpload = %u, bytesTotal = %u\n",
+        sessionId, firstFile, bytesUpload, bytesTotal);
+    return 0;
+}
+
+static void OnReceiveFileFinished(int sessionId, const char *files, int fileCnt)
+{
+    printf("File receive finished sessionId = %d, first file = %s, fileCnt = %d\n", sessionId, files, fileCnt);
+}
+
+static void OnFileTransError(int sessionId)
+{
+    printf("OnFileTransError sessionId = %d\n", sessionId);
+}
+
+//文件接收相关的回调
+static IFileReceiveListener g_fileRecvListener = {
+    .OnReceiveFileStarted = OnReceiveFileStarted,
+    .OnReceiveFileProcess = OnReceiveFileProcess,
+    .OnReceiveFileFinished = OnReceiveFileFinished,
+    .OnFileTransError = OnFileTransError,
+};
+
+int main(void)
+{
+    //1、设备B通过SetFileReceiveListener接口设置文件的接收回调。
+    int ret = SetFileReceiveListener(g_pkgNameB, g_sessionNameB, &g_fileRecvListener, g_rootDirB);
+    printf("set file receive listener result = %d\n", ret);
+
+    //2、设备B先根据应用包名和会话名称通过CreateSessionServer创建会话服务并注册通道打开关闭.字节接收.消息接收的回调。
+    ret = CreateSessionServer(g_pkgNameB, g_sessionNameB, &g_sessionlistenerB);
+    printf("create session server result = %d\n", ret);
+
+    //3、设备B通过OnSessionOpened收到会话打开的回调后后便等待设备A发送文件，当接收到文件时
+    //通过OnReceiveFileProcess和OnReceiveFileStarted，OnReceiveFileFinished反馈接收情况。
+
+    //4、接收数据结束后，设备B关闭会话并移除此次会话服务。
+    ret = RemoveSessionServer(g_pkgNameB, g_sessionNameB);
+    printf("remove session server result = %d\n", ret);
+}
\ No newline at end of file
diff --git a/zh-cn/native_sdk/dsoftbus/example/transport/sendstream_demo.c b/zh-cn/native_sdk/dsoftbus/example/transport/sendstream_demo.c
new file mode 100755
index 00000000..8df84de6
--- /dev/null
+++ b/zh-cn/native_sdk/dsoftbus/example/transport/sendstream_demo.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (c) 2022 Huawei Device Co., Ltd.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @file sendstream_demo.c
+ *
+ * @brief 发送流数据的示例。
+ * 
+ * @since 1.0
+ * @version 1.0
+ */
+
+//设备A：
+
+#include <stdio.h>
+#include "session.h"
+#include "softbus_config_type.h"
+
+const char *g_pkgNameA = "dms";  // 设备A的应用包名
+const char *g_sessionNameA = "ohos.distributedschedule.dms.test";  // 设备A的会话名称
+const char *g_networkidB = "ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00ABCDEF00";  // A和B组网时对端生成的networkid
+const char *g_groupid = "TEST_GROUP_ID";  //组网时的群组信息
+static SessionAttribute g_sessionAttr = {
+    .dataType = TYPE_BYTES,  //会话类型
+};
+
+//通知会话建立成功
+static int OnSessionOpened(int sessionId, int result)
+{
+    printf("session opened,sesison id = %d\r\n", sessionId);
+    return 0;
+}
+
+//通知会话关闭
+static void OnSessionClosed(int sessionId)
+{
+    printf("session closed, session id = %d\r\n", sessionId);
+}
+
+//通知流数据接收情况
+static void OnStreamReceived(int sessionId, const StreamData *data, const StreamData *ext,
+            const StreamFrameInfo *param)
+{
+    printf("session stream received, session id = %d\r\n", sessionId);
+}
+
+static ISessionListener g_sessionlistenerA = {
+    .OnSessionOpened = OnSessionOpened,
+    .OnSessionClosed = OnSessionClosed,
+    .OnStreamReceived = OnStreamReceived,
+};
+
+int main(void)
+{
+    //1、设备A先根据应用包名和会话名称通过CreateSessionServer创建会话服务并注册通道打开关闭.字节接收.消息接收的回调。
+    int ret = CreateSessionServer(g_pkgNameA, g_sessionNameA, &g_sessionlistenerA);
+    printf("create session server result = %d\n", ret);
+
+    //2、A根据本端会话名称和对端会话名称以及对端networkid调用OpenSession打开会话，根据会话的类型决定会话通道，当成功打开会话会通过回调通知设备A和设备B打开会话成功
+    //并返回会话ID，后续的数据发送依赖此会话ID。
+    int sessionId = OpenSession(g_sessionNameA, g_sessionNameB, g_networkidB, g_groupid, &g_sessionAttr);
+    printf("open session result = %d\n", sessionId);
+
+    //3、当会话打开成功后，设备A调用SendStream向设备B发送数据。
+    const StreamData streamData = {0};
+    const StreamData ext = {0};
+    const StreamFrameInfo param = {0};
+
+    ret = SendStream(sessionId, &streamData, &ext, &param);   
+    printf("send stream result = %d\n", ret);
+
+    //4、当数据发送完成后，设备A通过CloseSession接口关闭会话，并通知设备B关闭会话
+    CloseSession(sessionId);
+    printf("SOFTBUS_OK");
+
+    //5、关闭会话后，设备A和设备B通过RemoveSessionServer接口移除此次会话服务
+    ret = RemoveSessionServer(g_pkgNameA, g_sessionNameA);
+    printf("remove session server result = %d\n", ret);
+}
+
+//设备B：
+
+#include <stdio.h>
+#include "session.h"
+
+const char *g_pkgNameB = "dmsB";  // 设备B的应用包名
+const char *g_sessionNameB = "ohos.distributedschedule.dms.testB";  // 设备B的会话名称
+
+static int OnSessionOpened(int sessionId, int result)
+{
+    printf("session opened,sesison id = %d\r\n", sessionId);
+    return 0;
+}
+
+static void OnSessionClosed(int sessionId)
+{
+    printf("session closed, session id = %d\r\n", sessionId);
+}
+
+static void OnStreamReceived(int sessionId, const StreamData *data, const StreamData *ext,
+            const StreamFrameInfo *param)
+{
+    printf("session stream received, session id = %d\r\n", sessionId);
+}
+
+static ISessionListener g_sessionlistenerB = {
+    .OnSessionOpened = OnSessionOpened,
+    .OnSessionClosed = OnSessionClosed,
+    .OnStreamReceived = OnStreamReceived,
+};
+
+int main(void)
+{
+    //1、设备B先根据应用包名和会话名称通过CreateSessionServer创建会话服务并注册通道打开关闭.字节接收.消息接收的回调。
+    int ret = CreateSessionServer(g_pkgNameB, g_sessionNameB, &g_sessionlistenerB);
+    printf("create session server result = %d\n", ret);
+
+    //2、设备B通过OnSessionOpened收到会话打开的回调后后便等待设备A发送数据，当接收到数据时通过OnStreamReceived反馈接收情况。
+
+    //3、接收数据结束后，设备B关闭会话并移除此次会话服务。
+    ret = RemoveSessionServer(g_pkgNameB, g_sessionNameB);
+    printf("remove session server result = %d\n", ret);
+}
\ No newline at end of file
diff --git a/zh-cn/native_sdk/dsoftbus/inner_session.h b/zh-cn/native_sdk/dsoftbus/inner_session.h
new file mode 100755
index 00000000..a5fae621
--- /dev/null
+++ b/zh-cn/native_sdk/dsoftbus/inner_session.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2022 Huawei Device Co., Ltd.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @addtogroup 软总线
+ * @{
+ *
+ * @brief 在设备之间提供高速、安全的通信。
+ *
+ * 该部件实现附近设备之间的统一分布式通信能力管理，并提供独立于链路的设备发现和传输接口，以支持业务发布和数据传输。
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+
+/**
+ * @file inner_session.h
+ *
+ * @brief 为软总线身份认证声明函数。这些函数用于执行以下操作：
+ * <ul>
+ * <li>打开身份认证会话</li>
+ * <li>通知认证成功</li>
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+#ifndef INNER_SESSION_H
+#define INNER_SESSION_H
+
+#include "softbus_common.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @example openauthsession_demo.c
+ */
+
+/**
+ * @brief 启动身份认证会话打开请求。
+ *
+ * @param sessionName 指示指向本端身份认证会话名称的指针，会话名称是会话服务的唯一标志。该值不能为空，最多可包含256个字符。
+ * @param addrInfo 指示指向设备之间连接地址信息的指针。
+ * @param num 指示设备之间连接信息的数量。
+ * @param mixAddr 指示指向连接地址信息的指针，当第二个参数传入的地址信息无效时，通过转化该参数获取连接信息。
+ * 常见的错误代码如下：
+ * @return <b>SOFTBUS_INVALID_PARAM</b> 指示输入参数的值无效。
+ * @return <b>INVALID_SESSION_ID</b> 打开身份认证会话失败，并返回无效的会话标识。
+ * @return 如果身份认证会话成功打开，并且会话标识大于0，则返回会话标识，否则返回其他错误代码。
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+int OpenAuthSession(const char *sessionName, const ConnectionAddr *addrInfo, int num, const char *mixAddr);
+
+/**
+ * @brief 根据传输会话ID通知本端上层业务身份认证成功。
+ *
+ * @param sessionId 指示会话的唯一标识。
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+void NotifyAuthSuccess(int sessionId);
+
+#ifdef __cplusplus
+}
+#endif
+#endif
\ No newline at end of file
diff --git a/zh-cn/native_sdk/dsoftbus/session.h b/zh-cn/native_sdk/dsoftbus/session.h
new file mode 100755
index 00000000..b276e1d9
--- /dev/null
+++ b/zh-cn/native_sdk/dsoftbus/session.h
@@ -0,0 +1,730 @@
+/*
+ * Copyright (c) 2022 Huawei Device Co., Ltd.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * @addtogroup Softbus
+ * @{
+ *
+ * @brief Provides high-speed, secure communication between devices.
+ *
+ * This module implements unified distributed communication capability management between
+ * nearby devices, and provides link-independent device discovery and transmission interfaces
+ * to support service publishing and data transmission.
+ *
+ * @since 1.0
+ * @version 1.0
+*/
+
+/**
+ * @file session.h
+ *
+ * @brief Declares unified data transmission interfaces.
+ *
+ * This file provides data transmission capabilities, including creating and removing a session server,
+ * opening and closing sessions, receiving data, and querying basic session information. \n
+ * After multiple nearby devices are discovered and networked, these interfaces can be used to
+ * transmit data across devices. \n
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+#ifndef SESSION_H
+#define SESSION_H
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief 列举会话的业务类型
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef enum {
+    TYPE_MESSAGE = 1,  /**< 会话类型是消息类型 */
+    TYPE_BYTES,        /**< 会话类型是字节类型 */
+    TYPE_FILE,         /**< 会话类型是文件类型 */
+    TYPE_STREAM,       /**< 会话类型是流类型 */
+    TYPE_BUTT,
+} SessionType;
+
+/**
+ * @brief 列举流传输的业务类型
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef enum  {
+    INVALID = -1,         /**< 无效的流传输类型 */
+    RAW_STREAM,           /**< Send any segment of a frame each time. */
+    COMMON_VIDEO_STREAM,  /**< Send a whole video frame each time. */
+    COMMON_AUDIO_STREAM,  /**< Send a whole audio frame each time. */
+    VIDEO_SLICE_STREAM,   /**< Slice frame mode. */
+} StreamType;
+
+/**
+ * @brief 列举连接类型
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef enum  {
+    LINK_TYPE_WIFI_WLAN_5G = 1,  /**< 5GWiFi连接 */
+    LINK_TYPE_WIFI_WLAN_2G = 2,  /**< 2.4GWiFi连接 */
+    LINK_TYPE_WIFI_P2P = 3,      /**< p2p连接 */
+    LINK_TYPE_BR = 4,            /**< Br连接 */
+    LINK_TYPE_MAX = 4,           /**< 无效的连接类型 */
+} LinkType;
+
+/**
+ * @brief session attribute.
+ *
+ * control the attribute of session.
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    int dataType;                      /**< 传输数据类型{@link SessionType} */
+    int linkTypeNum;                   /**< 连接类型的个数 */
+    LinkType linkType[LINK_TYPE_MAX];  /**< 连接类型{@link LinkType} */
+    /**
+     * @brief 属性
+     *
+     * @since 1.0
+     * @version 1.0
+     */
+    union {
+        /**
+         * @brief 流数据的属性
+         *
+         * @since 1.0
+         * @version 1.0
+         */
+        struct StreamAttr {
+            int streamType;  /**< 流传输的类型{@link StreamType} */
+        } streamAttr;
+    } attr;
+} SessionAttribute;
+
+/**
+ * @brief 流数据
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    char *buf;   /**< 指示指向用于存储流数据的缓冲区的指针 */
+    int bufLen;  /**< 指示缓冲区的长度 */
+} StreamData;
+
+/**
+ * @brief 流扩展数据
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    int type;       /**< 扩展数据类型{@link TransEnumEventType} */
+    int64_t value;  /**< 扩展数据的值 */
+} TV;
+
+/**
+ * @brief 流传输的帧信息
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    int frameType;      /**< 帧类型，包括I帧和P帧 */
+    int64_t timeStamp;  /**< 时间戳 */
+    int seqNum;         /**< 序列号 */
+    int seqSubNum;      /**< 切片的序列号 */
+    int level;          /**< 可扩展视频编码级别，0：基本级别，1：扩展级别 1，2：扩展级别 2 */
+    int bitMap;         /**< 帧标记，比如标记帧的首尾分片 */
+    int tvCount;        /**< 扩展数据TV的数量 */
+    TV *tvList;         /**< 指向扩展数据的指针 */
+} StreamFrameInfo;
+
+/**
+ * @brief 服务质量
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef enum {
+    QOS_IMPROVE = 0,     /**< 提高服务质量 */
+    QOS_RECOVER = 1,     /**< 恢复服务质量 */
+} QosQuality;
+
+/**
+ * @brief 服务质量反馈
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef enum {
+    TRANS_STREAM_QUALITY_EVENT = 1,  /**< 流传输质量反馈 */
+    TRANS_CHANNEL_QUALITY_EVENT,     /**< 传输通道质量反馈 */
+    TRANS_CAN_DELAY_EVENT,           /**< 可延迟传输反馈*/
+    TRANS_CANT_DELAY_EVENT,          /**< 不可延迟传输反馈*/
+    QOS_EVENT_MAX                    /**< 无效的反馈 */
+} QosEvent;
+
+/**
+ * @brief 流传输服务质量事件类型
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef enum {
+    WIFI_CHANNEL_QUALITY = 1,      /**< WiFi信道质量 */
+    FRAME_REALTIME_STATUS = 2,     /**< 帧传输实时状态 */
+    BANDWIDTH_ESTIMATE_VALUE = 3,  /**< 带宽信息 */
+    JITTER_DETECTION_VALUE = 4,    /**< 网络抖动检测 */
+    STREAM_TRAFFIC_STASTICS = 5,   /**< 流传输流量统计 */
+} TransEnumEventType;
+
+/**
+ * @brief Wifi信道质量
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    int32_t channel;  /**< WiFi信道 */
+    int32_t score;    /**< WiFi信道评分 */
+} WifiChannelQuality;
+
+/**
+ * @brief 帧信息
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    int32_t streamId;     /**< 流数据的标识 */
+    int32_t seqNum;       /**< 帧序号 */
+    int32_t level;        /**< 帧层号 */
+    int32_t transStatus;  /**< 帧状态 */
+    int32_t interval;     /**< 未发送状态下的帧队列缓存时间 */
+} FrameStatus;
+
+/**
+ * @brief 带宽检测
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    uint32_t trend;  /**< 带宽变化趋势 */
+    uint32_t rate;   /**< 带宽速率 */
+} BandwidthDetection;
+
+/**
+ * @brief 网络抖动预测
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    int32_t jitterLevel;  /**< 预测网络状态 */
+    uint32_t bufferTime;  /**< 接收缓存所需时间 */
+} JitterEstimation;
+
+/**
+ * @brief 流传输信息统计
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    uint64_t statisticsGotTime;               /**< 统计获取流传输信息的时间点 */
+    uint64_t periodRecvBits;                  /**< 周期接收的比特数 */
+    uint32_t pktNum;                          /**< 数据包数量 */
+    uint32_t periodRecvPkts;                  /**< 周期接收的包数 */
+    uint32_t periodRecvPktLoss;               /**< 周期接收的丢包数 */
+    uint32_t periodRecvRate;                  /**< 周期接收速率，单位：kbps */
+    uint64_t periodRecvRateBps;               /**< 周期接收速率，单位：bps */
+    uint32_t periodRtt;                       /**< 周期往返时延，单位：毫秒 */
+    uint32_t periodRecvPktLossHighPrecision;  /**< 高精度展示周期接收的丢包率，比如当丢包率为1.10%时，该值为110 */
+    uint32_t periodSendLostPkts;              /**< 周期发送的丢包数 */
+    uint32_t periodSendPkts;                  /**< 周期发送的包数 */
+    uint32_t periodSendPktLossHighPrecision;  /**< 高精度展示周期发送的丢包率，比如当丢包率为1.10%时，该值为110 */
+    uint64_t periodSendBits;                  /**< 周期发送的比特数 */
+    uint64_t periodSendRateBps;               /**< 周期发送速率，单位：bps */
+} StreamStatistics;
+
+/**
+ * @brief 视频流传输服务质量
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    TransEnumEventType type;                 /**< 流传输服务质量事件类型{@link TransEnumEventType} */
+    union {
+        WifiChannelQuality wifiChannelInfo;  /**< Wifi信道质量{@link WifiChannelQuality} */
+        FrameStatus frameStatusInfo;         /**< 帧信息{@link FrameStatus} */
+        BandwidthDetection bandwidthInfo;    /**< 带宽预测{@link BandwidthDetection} */
+        JitterEstimation jitterInfo;         /**< 网络抖动预测{@link JitterEstimation} */
+        StreamStatistics appStatistics;      /**< 流传输信息统计{@link StreamStatistics} */
+    } info;
+} QosTv;
+
+/**
+ * @brief Defines session callbacks.
+ *
+ * When a session is opened or closed, or there is data to process, the related callback is invoked.
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    /**
+     * @brief Called when a session is opened.
+     *
+     * This function can be used to verify the session or initialize resources related to the session.
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @param result 0 if the session is opened successfully, returns an error code otherwise.
+     * @return Returns <b>0</b> if the session connection is accepted; returns a non-zero value
+     * otherwise (you do not need to call {@link CloseSession} to close the session).
+     * @since 1.0
+     * @version 1.0
+     */
+    int (*OnSessionOpened)(int sessionId, int result);
+
+    /**
+     * @brief Called when a session is closed.
+     *
+     * This function can be used to release resources related to the session.
+     * You do not need to call {@link CloseSession}.
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @since 1.0
+     * @version 1.0
+     */
+    void (*OnSessionClosed)(int sessionId);
+
+    /**
+     * @brief Called when data is received.
+     *
+     * This function is used to notify that data is received.
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @param data Indicates the pointer to the data received.
+     * @param dataLen Indicates the length of the data received.
+     * @since 1.0
+     * @version 1.0
+     */
+    void (*OnBytesReceived)(int sessionId, const void *data, unsigned int dataLen);
+
+    /**
+     * @brief Called when message is received.
+     *
+     * This function is used to notify that message is received.
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @param data Indicates the pointer to the message data received.
+     * @param dataLen Indicates the length of the message received.
+     * @since 1.0
+     * @version 1.0
+     */
+    void (*OnMessageReceived)(int sessionId, const void *data, unsigned int dataLen);
+
+    /**
+     * @brief Called when stream is received.
+     *
+     * This function is used to notify that stream is received.
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @param data Indicates the pointer to the stream data received.
+     * @param ext 指示指向要接收的业务扩展数据的指针
+     * @param param 指示指向流数据帧信息的指针
+     * @since 1.0
+     * @version 1.0
+     */
+    void (*OnStreamReceived)(int sessionId, const StreamData *data, const StreamData *ext,
+        const StreamFrameInfo *param);
+
+    /**
+     * @brief Called when QoS information is retrieved.
+     *
+     * This function is used to notify that QoS information is retrieved.
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @param eventId Indicates the type of QoS information, e.g., channel quality and stream quality
+     * @param tvCount Indicates the number of structure returned in the fourth parameters, i.e., tvList.
+     * @param tvList Indicates the detailed information of data transmission.
+     * @since 1.0
+     * @version 1.0
+     */
+    void (*OnQosEvent)(int sessionId, int eventId, int tvCount, const QosTv *tvList);
+} ISessionListener;
+
+/**
+ * @brief 定义文件接收回调。
+ *
+ * 当接收文件时，将调用相关的回调。
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    /**
+     * @brief 开始接收文件时调用.
+     *
+     * 此函数用于通知开始接收文件。
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @param files 指示指向接收的文件的指针。
+     * @param fileCnt 指示接收的文件的个数。
+     * @return 如果开始接收文件，则返回 <b>0</b>;否则返回非零值。
+     * @since 1.0
+     * @version 1.0
+     */
+    int (*OnReceiveFileStarted)(int sessionId, const char *files, int fileCnt);
+
+    /**
+     * @brief 正在接收文件时调用.
+     *
+     * 此函数用于通知正在接收文件。
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @param files 指示指向接收的第一个文件的指针。
+     * @param bytesUpload 指示当前已接收的文件大小。
+     * @param bytesTotal 指示拟接收的总文件大小。
+     * @return 如果正在接收文件，则返回 <b>0</b>;否则返回非零值。
+     * @since 1.0
+     * @version 1.0
+     */
+    int (*OnReceiveFileProcess)(int sessionId, const char *firstFile, uint64_t bytesUpload, uint64_t bytesTotal);
+
+    /**
+     * @brief 文件接收结束时调用.
+     *
+     * 此函数用于通知文件接收结束。
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @param files 指示指向接收的文件的指针。
+     * @param fileCnt 指示接收的文件的个数。
+     * @since 1.0
+     * @version 1.0
+     */
+    void (*OnReceiveFileFinished)(int sessionId, const char *files, int fileCnt);
+
+    /**
+     * @brief 文件传输出错时调用.
+     *
+     * 此函数用于通知文件传输出错。
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @since 1.0
+     * @version 1.0
+     */
+    void (*OnFileTransError)(int sessionId);
+} IFileReceiveListener;
+
+/**
+ * @brief 定义文件发送回调.
+ *
+ * 当发送文件时，将调用相关的回调。
+ *
+ * @since 1.0
+ * @version 1.0
+ */
+typedef struct {
+    /**
+     * @brief 正在发送文件时调用.
+     *
+     * 此函数用于通知正在发送文件。
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @param bytesUpload 指示当前已发送的文件大小。
+     * @param bytesTotal 指示拟发送的总文件大小。
+     * @return 如果正在发送文件，则返回 <b>0</b>;否则返回非零值。
+     * @since 1.0
+     * @version 1.0
+     */
+    int (*OnSendFileProcess)(int sessionId, uint64_t bytesUpload, uint64_t bytesTotal);
+
+    /**
+     * @brief 文件接收结束时调用.
+     *
+     * 此函数用于通知文件发送结束。
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @param firstFile 指示指向要发送的第一个文件的指针。
+     * @return 如果发送文件结束，则返回 <b>0</b>;否则返回非零值。
+     * @since 1.0
+     * @version 1.0
+     */
+    int (*OnSendFileFinished)(int sessionId, const char *firstFile);
+
+    /**
+     * @brief 文件传输出错时调用.
+     *
+     * 此函数用于通知文件传输出错。
+     *
+     * @param sessionId 指示会话的唯一标识。
+     * @since 1.0
+     * @version 1.0
+     */
+    void (*OnFileTransError)(int sessionId);
+} IFileSendListener;
+
+/**
+ * @brief Creates a session server based on a package name and session name.
+ *
+ * A maximum of 8 session servers can be created.
+ *
+ * @param pkgName 指示指向业务包名的指针, 是上层业务的唯一标识。该值不能为空，最多可包含 64 个字符。
+ * @param sessionName Indicates the pointer to the session name, which is the unique ID of the session server.
+ * The value cannot be empty and can contain a maximum of 256 characters.
+ * @param listener Indicates the pointer to the session callback structure, which cannot be empty.
+ * The common error codes are as follows:
+ * @return Returns <b>0</b> if the operation is successful; returns <b>-1</b> otherwise.
+ * @see RemoveSessionServer
+ * @since 1.0
+ * @version 1.0
+ */
+int CreateSessionServer(const char *pkgName, const char *sessionName, const ISessionListener *listener);
+
+/**
+ * @brief Removes a session server based on a package name and session name.
+ *
+ * @param pkgName 指示指向业务包名的指针, 是上层业务的唯一标识。该值不能为空，最多可包含 64 个字符。
+ * @param sessionName Indicates the pointer to the session name. The value cannot be empty and can contain
+ * a maximum of 256 characters.
+ * The common error codes are as follows:
+ * @return Returns <b>0</b> if the operation is successful, returns <b>-1</b> otherwise.
+ * @see CreateSessionServer
+ * @since 1.0
+ * @version 1.0
+ */
+int RemoveSessionServer(const char *pkgName, const char *sessionName);
+
+/**
+ * @brief Initiate a session open request, which is an asynchronous process.
+ *
+ * The session connection is opened based on the service name to trigger the first packet interaction process.
+ * According to the {@link OnSessionOpened} Notify the user whether the session is successfully opened.
+ * Data can be transmitted only after the session is successfully opened.
+ *
+ * @param mySessionName local session name.
+ * @param peerSessionName remote session name.
+ * @param peerNetworkId remote device id.
+ * @param groupId 群组标识，自组网时可为空，手动组网时需要向HiChain申请有效的群组Id.
+ * @param attr session attribute {@link SessionAttribute}.
+ * The common error codes are as follows:
+ * @return <b>SOFTBUS_TRANS_INVALID_PARAM</b> invalid param.
+ * @return <b>INVALID_SESSION_ID</b> open session failed, and return invalid session id.
+ * @return return sessionId if the session is opened successfully,
+ * and the sessionId is greater than 0, returns other error codes otherwise.
+ * @since 1.0
+ * @version 1.0
+ */
+int OpenSession(const char *mySessionName, const char *peerSessionName, const char *peerNetworkId,
+    const char *groupId, const SessionAttribute* attr);
+
+/**
+ * @brief Closes a connected session based on a session ID.
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @return no return value.
+ * @since 1.0
+ * @version 1.0
+ */
+void CloseSession(int sessionId);
+
+/**
+ * @example sendbytes_message_demo.c
+ */
+
+/**
+ * @brief Sends data based on a session ID.
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @param data Indicates the pointer to the data to send, which cannot be <b>NULL</b>.
+ * @param len Indicates the length of the data to send. The maximum length cannot exceed 984 characters.
+ * The common error codes are as follows:
+ * @return Returns <b>SOFTBUS_INVALID_PARAM</b> param data or len of value is invalid.
+ * @return Returns <b>SOFTBUS_TRANS_SEND_LEN_BEYOND_LIMIT</b> The data length exceeds the maximum limit.
+ * @return Returns <b>SOFTBUS_TRANS_INVALID_SESSION_ID</b> invalid session id.
+ * @return Returns <b>SOFTBUS_TRANS_SESSION_NO_ENABLE</b> session is currently disable.
+ * @return Returns <b>SOFTBUS_OK</b> if the function is called successfully, return other errorcode otherwise.
+ * @since 1.0
+ * @version 1.0
+ */
+int SendBytes(int sessionId, const void *data, unsigned int len);
+
+/**
+ * @brief Sends message based on a session ID.
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @param data Indicates the pointer to the message data to send, which cannot be <b>NULL</b>.
+ * @param len Indicates the length of the message to send.
+ * The common error codes are as follows:
+ * @return Returns <b>SOFTBUS_INVALID_PARAM</b> if the input data is NULL or len is Zero.
+ * @return Returns <b>SOFTBUS_TRANS_SEND_LEN_BEYOND_LIMIT</b> The data length exceeds the maximum limit.
+ * @return Returns <b>SOFTBUS_INVALID_SESSION_ID</b> if the sessionId is invalid.
+ * @return Returns <b>SOFTBUS_TRANS_SESSION_NO_ENABLE</b> if the session current be enabled.
+ * @return Returns <b>SOFTBUS_OK</b> if the function is called successfully, return other errorcode otherwise.
+ * @since 1.0
+ * @version 1.0
+ */
+int SendMessage(int sessionId, const void *data, unsigned int len);
+
+/**
+ * @example sendstream_demo.c
+ */
+
+/**
+ * @brief Sends stream based on a session ID.
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @param data Indicates the pointer to the stream data to send, which cannot be <b>NULL</b>.
+ * @param ext Indicates the pointer to the ext stream data to send, which cannot be <b>NULL</b>.
+ * @param param Indicates the pointer to the stream data of param, which cannot be <b>NULL</b>.
+ * The common error codes are as follows:
+ * @return Returns <b>SOFTBUS_INVALID_PARAM</b> if the input param is NULL.
+ * @return Returns <b>SOFTBUS_INVALID_SESSION_ID</b> if the sessionId is invalid.
+ * @return Returns <b>SOFTBUS_TRANS_SESSION_NO_ENABLE</b> if the session current be enabled.
+ * @return Returns <b>SOFTBUS_OK</b> if the function is called successfully, return other errorcode otherwise.
+ * @since 1.0
+ * @version 1.0
+ */
+int SendStream(int sessionId, const StreamData *data, const StreamData *ext, const StreamFrameInfo *param);
+
+/**
+ * @example getsessioninfo_demo.c
+ */
+
+/**
+ * @brief Obtains the session name registered by the local device based on the session ID.
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @param sessionName Indicates the pointer to the buffer for storing the session name.
+ * @param len Indicates the length of the buffer.
+ * The common error codes are as follows:
+ * @return Returns <b>SOFTBUS_INVALID_PARAM</b> Indicates invalid value for input param.
+ * @return Returns <b>SOFTBUS_OK</b> if the operation is successful, returns other error codes otherwise.
+ * @since 1.0
+ * @version 1.0
+ */
+int GetMySessionName(int sessionId, char *sessionName, unsigned int len);
+
+/**
+ * @brief Obtains the session name registered by the peer device based on the session ID.
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @param sessionName Indicates the pointer to the buffer for storing the session name.
+ * @param len Indicates the length of the buffer.
+ * The common error codes are as follows:
+ * @return Returns <b>SOFTBUS_INVALID_PARAM</b> Indicates invalid value for input param.
+ * @return Returns <b>SOFTBUS_OK</b> if the operation is successful, returns other error codes otherwise.
+ * @since 1.0
+ * @version 1.0
+ */
+int GetPeerSessionName(int sessionId, char *sessionName, unsigned int len);
+
+/**
+ * @brief Obtains the peer device ID based on a session ID.
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @param networkId Indicates the pointer to the buffer for storing the device ID.
+ * @param len Indicates the length of the buffer.
+ * The common error codes are as follows:
+ * @return Returns <b>SOFTBUS_INVALID_PARAM</b> Indicates invalid value for input param.
+ * @return Returns <b>SOFTBUS_OK</b> if the operation is successful, returns other error codes otherwise.
+ * @since 1.0
+ * @version 1.0
+ */
+int GetPeerDeviceId(int sessionId, char *networkId, unsigned int len);
+
+/**
+ * @brief Get session side based on a session ID.
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @return Returns <b>-1</b> Indicates get session side failed.
+ * @return Returns <b>0</b> Indicates the session is server side.
+ * @return Returns <b>1</b> Indicates the session is client side.
+ * @since 1.0
+ * @version 1.0
+ */
+int GetSessionSide(int sessionId);
+
+/**
+ * @brief Set file receive listener.
+ *
+ * @param pkgName Indicates the pointer to the name of the registered package, which can be used to check
+ * whether the session server is in this package. The value cannot be empty and can contain a maximum of 64 characters.
+ * @param sessionName Indicates the pointer to the buffer for storing the session name.
+ * @param recvListener Indicates the pointer to the file receive listener, which cannot be <b>NULL</b>.
+ * @param rootDir 指示指向文件存储的根路径的指针，长度不超过256位。
+ * The common error codes are as follows:
+ * @return Returns <b>SOFTBUS_INVALID_PARAM</b> Indicates invalid value for input param.
+ * @return Returns <b>SOFTBUS_TRANS_SESSION_ADDPKG_FAILED</b> if add pkgName failed.
+ * @return Returns <b>SOFTBUS_OK</b>if the function is called successfully, return other errorcodes otherwise.
+ * @since 1.0
+ * @version 1.0
+ */
+int SetFileReceiveListener(const char *pkgName, const char *sessionName,
+    const IFileReceiveListener *recvListener, const char *rootDir);
+
+/**
+ * @brief Set file sendListener based on pkgName and sessionName .
+ *
+ * @param pkgName 指示指向业务包名的指针, 是上层业务的唯一标识。该值不能为空，最多可包含 64 个字符。
+ * @param sessionName Indicates the pointer to the buffer for storing the session name.
+ * @param sendListener Indicates the pointer to the file send listener, which cannot be <b>NULL</b>.
+ * The common error codes are as follows:
+ * @return Returns <b>SOFTBUS_INVALID_PARAM</b> if the input param is invalid.
+ * @return Returns <b>SOFTBUS_TRANS_SESSION_ADDPKG_FAILED</b> if add pkgName failed.
+ * @return Returns <b>SOFTBUS_OK</b>if the function is called successfully, return other errorcodes otherwise.
+ * @since 1.0
+ * @version 1.0
+ */
+int SetFileSendListener(const char *pkgName, const char *sessionName, const IFileSendListener *sendListener);
+
+/**
+ * @example sendfile_demo.c
+ */
+
+/**
+ * @brief Sends file based on a session ID.
+ *
+ * @param sessionId 指示会话的唯一标识。
+ * @param sFileList Indicates the pointer to the source file list to send, which cannot be <b>NULL</b>.
+ * @param dFileList Indicates the pointer to the destination file list to send, which cannot be <b>NULL</b>.
+ * @param fileCnt Indicates the number of files to send, whic cannot be <b>0</b>.
+ * The common error codes are as follows:
+ * @return Returns <b>SOFTBUS_INVALID_PARAM</b> if the sFileList is NULL or fileCnt is Zero.
+ * @return Returns <b>SOFTBUS_INVALID_SESSION_ID</b> if the sessionId is invalid.
+ * @return Returns <b>SOFTBUS_TRANS_SESSION_NO_ENABLE</b> if the session current be enabled.
+ * @return Returns <b>SOFTBUS_OK</b>if the function is called successfully, return other errorcodes otherwise.
+ * @since 1.0
+ * @version 1.0
+ */
+int SendFile(int sessionId, const char *sFileList[], const char *dFileList[], uint32_t fileCnt);
+
+#ifdef __cplusplus
+}
+#endif
+#endif  // SESSION_H
-- 
Gitee